Crew transfer vessel charter

Your Crew on Site at 20 Knots

Every hour a crew spends getting to the job is an hour you still pay for. Our 65 ft aluminum crew boats cruise at 20 knots from Port Jefferson, New Haven and North Kingston, seat up to 29, and carry 12,000 lbs of gear on an open aft deck.

20 Knot Aluminum Hulls

Abigail, Erin and Joel Miller are 65 ft aluminum crew boats that cruise at 20 knots, so a crew change across the Sound takes far less of the day.

Seats and Certification

Abigail Miller seats 29 passengers and Erin Miller is US Coast Guard certified for 32, with a full head, shower, galley and climate control.

Gear Rides With the Crew

Each boat has a clear 16 by 20 ft aft deck rated for 12,000 lbs, so tools, parts and survey kit go out on the same trip as the people.

Three Northeast Bases

Boats sail from Port Jefferson, NY, New Haven, CT and North Kingston, RI, which keeps runs to Long Island Sound and Rhode Island job sites short.

What a crew transfer vessel is

Moving People Is the Whole Job

A crew transfer vessel is a fast boat built to move workers, light cargo and supplies between shore and a job on the water, then wait or return on schedule. On offshore wind farms the term usually means a purpose-built catamaran that pushes onto a turbine. In construction, survey and port work, the same job is done by a crew boat, and that is what we run. Our three 65 ft crew boats were built for exactly this. They are aluminum, so they are light and quick, they cruise at 20 knots and they ride comfortably with a full load of people. Below deck there are berths, an electric galley and heads with showers, so a crew can stay aboard between shifts. On deck, a 16 by 20 ft clear space takes up to 12,000 lbs, and a removable A-frame aft can tow survey equipment when a crew boat doubles as a survey platform.

Crew boat charter for construction, survey and port work

What Changes When Transfers Are Fast

A crew boat earns its day rate in hours saved. Here is where our boats save the most for the teams that charter them.

Call Miller Marine Services

orange lifebuoy attached to boat

Crew boats compared: Abigail, Erin and Joel Miller

Three Sister Boats, Three Layouts

All three boats share the same 65 ft by 17 ft hull, a 5 ft draft, twin Detroit diesels, 20 knot cruising speed and 1,100 gallons of fuel. They differ inside. Abigail Miller seats 29 passengers, has berths below with more berthing in the saloon, and can deliver up to 1,000 gallons of potable water from auxiliary tanks. Erin Miller has 1,000 hp, four berths plus a stateroom for two, and is US Coast Guard certified for 32 passengers. Joel Miller has a roomy midsection saloon and two staterooms with six berths in total, which suits crews who spend the day aboard. If your job needs more than one boat, the three can run together on a rotating schedule, so a fresh crew is always on the way out as the last one comes in.

Crew transfer for offshore wind and survey projects

Supporting the Work Around the Wind Farm

Offshore wind projects off New York and New England need far more boat trips than the turbine installation itself. Survey teams, environmental monitors, inspectors and construction crews all have to get to the site, often from Long Island and Rhode Island harbors. Our crew boats are a good fit for those runs: fast, comfortable and able to carry a survey package along with the team. We are honest about the limits. A 65 ft monohull crew boat is not a purpose-built wind farm catamaran with a push-on bow, so it is the right tool for transfers to vessels, barges, platforms and docks rather than direct turbine access. For the wider picture of how we support wind projects, see our wind farm construction and support page.
Offshore Support Vessel
Crew Transfer Vessel Charter FAQs

Common Questions About Our Service

A crew transfer vessel is a fast boat that carries workers, tools and light cargo between shore and a job on the water. In offshore wind it often means a catamaran built for turbine access; in construction and survey work the same job is done by crew boats like our 65 ft Abigail, Erin and Joel Miller.
Abigail Miller seats 29 passengers and Erin Miller is US Coast Guard certified for 32. If you need to move more people at once, two or three of our crew boats can run together.
All three cruise at 20 knots. They are built of aluminum, which keeps them light, so they hold that speed with a full load of passengers.
Yes. Each boat has a clear 16 by 20 ft aft deck that takes up to 12,000 lbs of cargo, and a removable A-frame aft for towing survey equipment. For heavier loads, our 65 ft and 100 ft utility vessels are the next step up.
Not exactly. A wind farm CTV is usually a catamaran designed to push its bow against a turbine so technicians can step across. Our crew boats are monohulls built for speed, comfort and cargo, and they are best for transfers to vessels, barges, platforms and docks.
Yes. Abigail Miller has berths below with more in the saloon, Erin Miller has four berths plus a stateroom for two, and Joel Miller has two staterooms with six berths. All three have an electric galley, full head and shower, and central heating and air.

Share the Run

Tell us the pickup harbor, the job site, how many people, how much gear and the dates. Call 631-331-5336 or use the form below.

We Set the Schedule

We assign Abigail, Erin or Joel Miller, or a rotation of two or three boats, and agree the transfer times and the base each run starts from.

Your Crew Gets There

The boat arrives on time, loads people and gear, makes the run at 20 knots and returns or stands by for the next transfer.